6165con登录平台

欢迎光临山汽集团企业官网!
400-879-1999
在线购机
点击拨打服务热线:400-879-1999
很多企业在进行施工过程中,为了提高自身的利益,持续效率高的进行工作,如果设备因为故障而导致维修的话则会增加很多成本。而通常在操作使用全自动搅拌车的过程中零件磨损是比较常见的,那么在使用中大家应该要这样来避免这种情况的发生呢?
Many enterprises in the construction process, in order to improve their own interests, continuous and efficient work, if the equipment due to failure and maintenance, it will increase a lot of costs. And usually in the operation of the use of automatic mixer in the process of parts wear is more common, so in use we should do this to avoid the occurrence of this situation?
1、保持全自动搅拌车设备工作的额定载荷
1. Maintain the rated load of the automatic mixer
像这类的工程机械设备的载荷性质以及大小对设备零件的损耗都是有着重要影响的,一般机械零件的磨损都是会随着负荷的增加而增加的,当零件所承受的载荷高于设计的工作载荷时,其部件磨损将会不断加剧。
The load nature and size of such construction machinery equipment have an important impact on the loss of equipment parts. Generally, the wear of mechanical parts will increase with the increase of load. When the load of parts is higher than the designed working load, the wear of parts will continue to increase.
2、及时清洁,减少对机械杂质对设备的影响
2. Clean in time to reduce the impact of mechanical impurities on the equipment
机械杂质一般指的是灰尘、泥土等物质和工程机械在使用过程中自身产生的一些金属屑、油垢等。这些杂质一旦到达机械的工作表面之间,其危害是很大的:不但使摩擦力增大,油耗升高。而且会破坏润滑油膜,擦伤配合表面。
Mechanical impurities generally refer to dust, soil and other substances, as well as some metal scraps and oil dirt produced by construction machinery in the process of use. Once these impurities reach the working surface of the machine, the harm is great: not only the friction increases, but also the fuel consumption increases. It will also damage the lubricating oil film and scratch the mating surface.
              全自动搅拌车
3、预防自动上料搅拌车零件腐蚀
3. Prevention of parts corrosion of automatic feeding mixer
腐蚀作用在零件上,有时不易被发现,容易被人忽视,危害性更大。雨水、空气中的化学物质等通过机械零部件的管道、缝隙等渗入机械,腐蚀零件。被腐蚀的零件继续工作也会使机械加速磨损,增加机械故障。这就要求管理者和操作人员要根据当时当地的天气情况、工地现场情况,采取合理的施工安排,尽可能减小化学腐蚀对机械零件的危害。
Corrosion on the parts, sometimes not easy to be found, easy to be ignored, more harmful. The chemical substances in the rain and air penetrate into the machinery through the pipes and crevices of the mechanical parts and corrode the parts. If the corroded parts continue to work, the mechanical wear will be accelerated and the mechanical failure will be increased. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions at that time, so as to minimize the harm of chemical corrosion to mechanical parts.
4、保持全自动搅拌车设备零件的合理温度
4. Keep the reasonable temperature of the parts of the automatic mixer
在工作中,各个零部件的温度都有各自的正常范围。温度过高过低会影响零件的强度,所以需要配合冷却液和润滑油控制部分零件的温度,使他们工作在合理温度范围。
In the work, the temperature of each part has its own normal range. Too high or too low temperature will affect the strength of parts, so it is necessary to control the temperature of some parts with coolant and lubricating oil to make them work in a reasonable temperature range.
很多机械设备在故障开始的时候都是由于零件磨损引起的,自动搅拌车在操作运行过程中自然也同样如此。因此,在使用过程中降低对设备零件的磨损,能够有效避免机械设备在使用过程中的故障发生。
Many mechanical equipment in the beginning of the failure is caused by wear parts, automatic mixer in the operation process of nature is the same. Therefore, reducing the wear of equipment parts in the process of use can effectively avoid the failure of mechanical equipment in the process of use.
上一页:自上料搅拌车的发动机保养问题是怎样的? 下一页:自拌混凝土搅拌车如何防止车体罐体容积变小?
热门产品 / HOT PRODUCT
4.0方全自动搅拌车
推荐产品

4.0方全自动搅拌车

1.8方6165con登录平台
推荐产品

1.8方6165con登录平台

5.5方全自动搅拌车
推荐产品

5.5方全自动搅拌车

4吨A斜前
推荐产品

4吨A斜前

3.5吨A后尾
推荐产品

3.5吨A后尾

3.5方B款平口搅拌车
推荐产品

3.5方B款平口搅拌车

3.5方C款平口搅拌车
推荐产品

3.5方C款平口搅拌车

3.5吨A后侧
推荐产品

3.5吨A后侧

3.5方A款平口搅拌车
推荐产品

3.5方A款平口搅拌车

3.5吨C款后尾
推荐产品

3.5吨C款后尾

3.5方A款6165con登录平台
推荐产品

3.5方A款6165con登录平台

3.5方D款全自动搅拌车
推荐产品

3.5方D款全自动搅拌车

4吨A后尾
推荐产品

4吨A后尾

3.5方D款平口搅拌车
推荐产品

3.5方D款平口搅拌车

3.5方C款全自动搅拌车
推荐产品

3.5方C款全自动搅拌车

3.5吨B款正侧
推荐产品

3.5吨B款正侧

4方同步旋转6165con登录平台
推荐产品

4方同步旋转6165con登录平台

4.0方6165con登录平台
推荐产品

4.0方6165con登录平台

1.8方平口搅拌车
推荐产品

1.8方平口搅拌车

3.5方D款6165con登录平台
推荐产品

3.5方D款6165con登录平台

资讯推荐 / NEWS RECOMMEND ATIONS