6165con登录平台

欢迎光临山汽集团企业官网!
400-879-1999
在线购机
点击拨打服务热线:400-879-1999
自动上料搅拌机高温问题有很大的危害,需要注意,尤其是夏天,很多机器都容易出现高温问题,如何避免自动上料搅拌机高温危害呢?小编总结了以下几点:
The high temperature problem of automatic feeding mixer has great harm, which needs attention. Especially in summer, many machines are prone to high temperature problems. How to avoid the high temperature hazard of automatic feeding mixer? The editor summarized the following points:
1、防止发动机机体过热:由于环境温度比较高,因此发动机容易过热,要加强对发动机冷却系统的检查、保养,这包括水箱、节温器、水泵、风扇等部件的检查,并且要注意及时加注冷却水。当水温超过100℃时,应在阴凉处停车降温,让发动机怠速运转,并掀开发动机罩帮助散热。
1. Prevent the engine body from overheating: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system, including the inspection of water tanks, thermostats, water pumps, fans and other components, and pay attention to the timely filling of cooling water. When the water temperature exceeds 100 ℃, stop in a cool place to cool down, let the engine idle, and lift the hood to help dissipate heat.
2、防止车漆受损:车漆经过强烈的阳光曝晒,会发旧、起皱,而普通的美容打蜡虽然可以起到一定的防晒效果,但由于任何车蜡都含有矽的成分,久经紫外线照射会锈蚀车漆,留下点点黑斑。车蜡本身起不到增强硬度、抗紫外线的作用,反而会因温度过高而很快流失,停车时要注意尽量把车停放在阴凉处。
2. Prevent the car paint from being damaged: the car paint will get old and wrinkled after being exposed to strong sunlight. Although ordinary beauty waxing can have a certain sunscreen effect, because any car wax contains silicon, it will rust the car paint after a long time of ultraviolet radiation, leaving a little black spots. The car wax itself can't enhance hardness and resist ultraviolet rays, but will quickly lose due to high temperature. When parking, you should pay attention to parking the car in a cool place as far as possible.
3、防止车胎爆裂:气温高所以比较容易爆胎,温度过高时很容易使轮胎变形,抗拉力下降。而作为轮胎本身,气压不标准、轮胎老化、性能减弱,或者在行驶过程中轮胎轧到了坚硬的金属或其他硬物等情况,都会导致汽车突然间爆胎。
3. Prevent tire burst: high temperature makes it easy to burst. When the temperature is too high, it is easy to deform the tire and reduce the tensile resistance. As for the tire itself, the non-standard air pressure, aging of the tire, weakening of performance, or the tire rolling into hard metal or other hard objects during driving will cause the car to burst suddenly.
4、防止刹车制动失灵:制动液在高温环境中更容易蒸发汽化,在制动管路中形成气阻,制动蹄片也容易烧蚀,造成制动失灵。所以要经常检查调整制动系统,下长坡途中应注意停车晾刹,保证制动性能良好。如果发现制动毂发烫,应停车降温,但不可浇泼冷水,以防制动毂破裂。
4. Prevent brake failure: the brake fluid is easier to evaporate in high temperature environment, forming air resistance in the brake pipeline, and the brake shoes are also easy to be ablated, causing brake failure. Therefore, check and adjust the braking system frequently. Pay attention to parking and braking on the way down a long slope to ensure good braking performance. If the brake hub is found to be hot, stop and cool down, but do not pour cold water to prevent the brake hub from cracking.
高温危害是不可忽略的,以上几点大家在使用全自动搅拌车时一定要注意。感谢您在百忙之中查看我企业的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
The harm of high temperature cannot be ignored. We must pay attention to the above points when using the automatic feeding mixer. Thank you for checking the information content of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!
上一页:自动上料搅拌车损坏后的维修方法 下一页:混凝土自上料搅拌车离合器不分离怎么办?
热门产品 / HOT PRODUCT
4吨A斜前
推荐产品

4吨A斜前

3.5吨B款斜前
推荐产品

3.5吨B款斜前

超宽1.8米挡货架
推荐产品

超宽1.8米挡货架

4吨A后侧
推荐产品

4吨A后侧

6.5方6165con登录平台
推荐产品

6.5方6165con登录平台

3.5方A款平口搅拌车
推荐产品

3.5方A款平口搅拌车

3.5吨B款正侧
推荐产品

3.5吨B款正侧

5.5方6165con登录平台
推荐产品

5.5方6165con登录平台

4吨B正侧
推荐产品

4吨B正侧

4吨B斜前
推荐产品

4吨B斜前

2.6方同步旋转6165con登录平台
推荐产品

2.6方同步旋转6165con登录平台

3.5B款方全自动搅拌车
推荐产品

3.5B款方全自动搅拌车

4吨A后侧
推荐产品

4吨A后侧

5.5方全自动搅拌车
推荐产品

5.5方全自动搅拌车

6.5方全自动搅拌车
推荐产品

6.5方全自动搅拌车

3.5吨C款斜前
推荐产品

3.5吨C款斜前

1.8方平口搅拌车
推荐产品

1.8方平口搅拌车

3.5方C款平口搅拌车
推荐产品

3.5方C款平口搅拌车

3.5吨A后尾
推荐产品

3.5吨A后尾

2.6方6165con登录平台
推荐产品

2.6方6165con登录平台

资讯推荐 / NEWS RECOMMEND ATIONS